-
- Laboratory Equipment
- High Viscosity Mixers
- Dispersers
- Inline High-speed Disperser
- Vacuum Drying Mixers
- Powder Blenders
- Grinding Machines
- High Shear Emulsifiers
- Extrusion Machine
- Container Washing Machine
- Powder Procedure Processing
- Batching And Metering
- Filling And Packing
- Filters And Sieves
- Kettles/Vessels/Tanks/ Hoppers
- Turn-key Project
Laboratory Vertical Mixer
Lab vertical mixer is a kind of mixing equipment used for laboratory research. It is placed vertically and has the characteristics of good mixing effect and easy operation. Using mechanical forces and gravity, the material is continuously lifted upwards from the bottom by means of a specific mixing method, such as the screw ribbon in a ribbon mixer, to ensure that the material is fully mixed. The vertical mixer is particularly suitable for the mixing of shear-sensitive crystalline powders and for operations where liquids are mixed into solids.
Product Overview
| Materials Specific Gravity | ≤3g/cm³ |
| Production Capacity | 12-24L |
| Application Industry | Suitable for drying and mixing of product materials in pharmacy, food, flavor, dye, chemical industry, plastic, rubber and etc. |
| Applicable Materials | The specific gravity of the material is less than 3g/cm³ with a certain fluidity, liquid content of less than 20% of the powder or particles, such as medical intermediate, flavoring, pesticide, reactive dyes, etc. |
Working Principle:
The working principle of the vertical ribbon mixer is mainly composed of a rotating spiral and a fixed cylinder. When the material in the cylinder enters the machine, the ribbon begins to rotate, moving upward while the material in the center moves downward for mixing flowable powders and granular materials, a large amount of materials can be mixed in a short time, high standards of uniform mixing can be achieved, and the material discharge is completely clean.
Vertical ribbon mixer is usually conical barrels with a discharge port at the bottom for clean discharge. The mixing part adopts an electric lifting structure. The feed pipe is usually at the upper part of the mixing barrel for adding raw materials. The mixing part is connected to the barrel. The body can be separated for easy maintenance and cleaning.
The machine can be equipped with a heating jacket, which can be heated by hot water, hot oil, steam and other heat media; the whole machine is designed to be sealed and can be connected to a vacuum system to vacuum and discharge the liquid.
Product Advantages
-
Compact structure, safe and reliable
Choose the overall structure design, three-point support mode, fit the mechanical principle. Compact structure, safe and reliable equipment, small size, low noise, high environmental performance. The non-contact sealing construction voids the oil leakage problem that may be caused by traditional contact sealing.
-
High Mixing Efficiency
It has a strong mixing effect, make the materials near the container wall move upward, the materials in the center move downward, a soft but complete convective circulation mixing effect.
-
Easy Operation
The equipment is simple to operate, maintenance, for laboratory personnel. the same time, is usually equipped with a touch screen display, intuitively monitor and adjust the working parameters, such as re, degree and so on.
-
Tailored Design
Equipped with spray system for humidification or adding various auxiliaries. Optional automatic control system, HMI+PLC control mode, with parameter saving and output, easy to save test data and statistics.
Gas explosion proof or dust explosion proof type can be customized.
Related Video
Technical Parameter
| Model | Voltage | Motor Power
(kw) |
Mixing Speed
（rpm） |
Capacity
(L) |
Discharge Port | Material | Lifting Stroke（mm） |
| SVZL-40 | 380V/50HZ | 1.1 | 0-100 | 12-24 | DN100
Pneumatic ball valve |
Material contact part SS304/SS316L | 600 |
More Products
Contact Information
Leave Us a Message
Please kindly fill out the following form if any question or for more information, we will reply you as soon as possible.
